|
 MDR-80
Solid State Video and Mission Data Recorder with high
speed I/O and mission data loading options.
It Fits
Your specs. Your budget. And the same slot as our V-80. No aircraft
mods required. (Basic single channel MDR-80)
Our new MDR-80™
captures them all.
- Digital Video
- 1553 Recording RT/BM
- PCM Recording
- Digital Video Transmit/Receive
- ACMI
- 24+ GB Memory
The MDR-80 Offers
- Best technology insertion path for transmission
to digital mission recording
- Plug-in application cards provide flexible operational
configurations
- Basic unit—single channel video. Add
ons include:
- additional video channels
- 1553
- ACMI
- Digital video receive/transmit
- "smart" control
- Cost effective approach—Form, Fit, and Function
replacement for TEAC V-80 series AVTR
- Support of the TEAC V-80 serial I/O communication
protocol
- Simultaneous record and playback
- MPEG-2 video compression w/selectable bit rates
- Up to five (5) channels of video recording via
user application cards
- Dynamic modification of video and audio encoding
bit rates
- User and/or aircraft controls via high-speed
or low-speed data bus(es)
- Software configuration control enables upgrade
and expansion without hardware modification
- Solid State Removable Memory Module (RMM) interfaces
directly to ground debriefing station via industry standard interface
- Multiple RMM configurations available
- Industry standard processor architecture and
operating system assures supportability
- Optional time-synchronized ACMI data recording
via application-specific ACMI card
- Expansion cards to add functional growth
User Application Cards
- MPEG-2 video
- 2 channel record card or
- 1 channel record & 1 channel playback card
- 1553 recording
- Digital video receive and transmit
- Fibre channel interface
- 10BaseT/100BaseT
- Autonomous ACMI
| Specifications |
| Video |
Video Signal Standard:
|
EIA RS-170 or NTSC
CCIR (PAL) |
Horizontal Resolution:
|
500-TVL nominal
(Selectable by bit rate) |
Linearity:
|
10 gray scale or better |
S-to-Noise Ratio:
|
Better than 43dB |
Input:
|
1.0Vpp, 75 ohm negative sync |
Level Control:
|
Automatic Gain Control (AGC) |
Outputs:
|
1.0Vpp, 75 ohm negative sync |
S-Video Input:
|
1.0Vpp (Y), 0.3Vpp (C), 75 ohm |
S-Video Output:
|
1.0Vpp (Y), 0.3Vpp (C), 75 ohm |
| Audio |
Number of Channels:
|
One (or Two) |
Input Level:
|
0.9Vpp nominal, (-10dBV) |
Input Impedance:
|
10K ohm |
Level Control:
|
Automatic Gain Control |
Output level:
|
0.9Vpp (47K ohm load) |
Bandwidth:
|
50Hz to 15KHz |
Signal-to-Noise Ratio:
|
Better than 40dB |
| Power |
Requirement:
|
28VDC (+4V, -8V) unregulated
MIL-STD-704A, MIL-STD-704D,
MIL-STD-704E |
Consumption:
|
35 watts nominal at 28VDC
(45 watts with heater on) |
| Weight: |
6.6 pounds (3kg)
|
|
| Dimensions |
Width:
|
5.9" (149mm) |
Height:
|
4.8"(122mm) |
Depth:
|
6.4"(162mm) |
| Dimensions exclude
connectors and handles |
| Operational
Position |
Any direction
|
|
| Installation |
The MDR-80 can be installed both vertically or horizontally,
4 ways
|
| Connectors |
Power:
|
Bendix PT02E-10-6P type |
Control and Signal:
|
Bendix PT02E-18-32P
type or 66P type |
| (Optional MIL-C-38999, Series 3 connectors
available) |
|
MDR-87
Solid State
Mission Data Recorder
MDR-80
Solid State
Video & Mission Data Recorder
VSC-80A
Video System
VSC-80B
Video System
V-80AB-F
single-deck,
Hi-8mm video recorder
V-83AB-F
triple-deck,
Hi-8mm
video recorder
The
ME-1000
Solid State
Recorder
SSR
|
