|
V-80AB-F
 The
V-80AB-F includes such unique features as an internal MIL-STD-704D
28-volt power supply, 4.0 MHz bandwidth, 400 TV
lines of horizontal resolution in color or monochrome, a 2-hour
minimum record time, automatic internal heater, and TEAC's guarantee
of production and logistical support for the life of most avionics
programs. Download
the PDF
GENERAL
| Capability: |
Record and Playback, Color and Black & White |
| Tape Type: |
Hi-8mm video cassette |
| Tape Format: |
Hi-8mm |
| Maximum Recording
Time: |
120 minutes |
| Power Requirement:
|
28VDC (+4V, -8V) unregulated, MIL-STD-704D |
| Power Consumption:
|
15 watts (nominal) at 28VDC (45 watts with heater on) |
| Dimensions: |
148(W) x 120(H) x 161(D)mm, or 5.83"(W) x 4.73"(H)
x 6.11"(D), excluding connectors, handles, and buttons.
|
| Operational Position: |
All directions |
| Installation: |
Vertical or horizontal, 4 ways |
| Weight: |
Less than 6 pounds (3kg) |
| Connectors: |
Power: Bendix PT02E-10-6P type Control and signal: PT02E-18-32P
type (Optional Mil-C-38999, Series 3 connectors available)
|
FUNCTIONAL
| Remote Controls: (Discrete) |
UNTHREAD, REC, STDBY, EMK REC |
| Remote Controls: (RS-422) |
UNTHREAD, REC, STDBY, PLAY, F.F., REW, SEARCH FWD, SEARCH
RVS, STILL, EMK REC, TIMER RESET |
| Local Controls: |
CASSETTE REMOVE, REC, UNTHRD, STDBY, EMK REC, REW, F.F.,
PLAY |
| Remote Indicator Signals (Discrete):
|
REC, STDBY, EOT, DEW, PLAY |
| Remote Indicator Signals (R-422):
|
STOP, REC, STDBY, PLAY, F.F., REW, SEARCH FWD, SEARCH RVS,
STILL, EOT, BOT, DEW, CASSETTE IN, UNTHREAD END, THREAD MOTOR
ON, TAPE COUNTER, ERROR, COMMAND ERROR, PARITY/FRAMING ERROR,
EMK DET |
| Interface: |
Discrete or R-422 Full Duplex |
VIDEO
| Video Signal Standard: |
EIA RS-170 or NTSC; PAL |
| Bandwidth: |
4 MHz |
| Horizontal Resolution: |
400-lines or more |
| Linearity: |
10 gray scale or better |
| Signal-to-Noise Ratio: |
Better than 43dB |
| Composite Inputs: |
1.0vp-p, 75-ohm negative sync |
| Level Control: |
Automatic Gain Control (AGC) |
| Composite Outputs: |
1.0Vp-p, 75-ohm negative sync |
| S-Video Input: |
1.0Vp-p (Y), 0.3Vp-p(C). 75-ohm |
| S-Video Output: |
1.0Vp-p (Y), 0.3Vp-p(C). 75-ohm |
AUDIO
| Number of Channels: |
One (2 channel stereo model available) |
| Input Level: |
0.9Vp-p nominal, (-10dBV) |
| Input Impedance: |
10K-ohm 20% |
| Level Control: |
Automatic Gain Control (AGC) |
| Output Level: |
0.9Vp-p (47K-ohm load) |
| Bandwidth |
(Frequency Response): 50Hz to 15KHz |
| Signal-to-Noise Ratio: |
Better than 40dB |
ENVIRONMENTAL
| Storage Temperature: |
-55°C to +95°C; MIL-STD-810D 501.2(I) and 502.2(I)
|
| Operating Temperature: |
-15°C to +60°C; MIL-STD-810D 501.2(II) and 502.2(II)
(-40°C to +60°C with heater on) |
| Temperature-Altitude: |
Sea level to 50,000 feet in an unpressurized, unsealed case;
MIL-STD-810D 500.2, operating |
| Storage Humidity: |
95% (60°C) to 85% (30°C); MIL-STD-810D 507.1(II)
|
| Operating Humidity: |
Zero to 80% relative humidity (non-condensing) |
| Explosive Atmosphere: |
MIL-STD-810D 511.2(I) |
| Vibration (Operational): |
MIL-STD-810D 514.3 (use of proper shock mount is recommended)
|
| Acceleration (Operational): |
10G's, MIL-STD-810D 513.3(II) |
| Shock (Operational): |
20G's, MIL-STD-810D 516.3(I)
40G's, MIL-STD-810D 516.3(V), Crash Safety |
| Dust/Fine Sand: |
MIL-STD810C, Method 510.1 |
| Salt Fog: |
MIL-STD810D, Method 509.2 |
| Radio Frequency Interference/ Electromagnetic
Interference: |
MIL-STD-461C (all test) |
| Heater: |
Thermostat-initiated at 0±5°C |
Specifications contained
herein are subject to change without notice.
To view or
print a more detailed schematic, click on the view you are interested
in
|
MDR-87
Solid State
Mission Data Recorder
MDR-80
Solid State
Video & Mission Data Recorder
VSC-80A
Video System
VSC-80B
Video System
V-80AB-F
single-deck,
Hi-8mm video recorder
V-83AB-F
triple-deck,
Hi-8mm
video recorder
The
ME-1000
Solid State
Recorder
SSR
|
